| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_setattr_size()
ntfs_setattr_size() updates i_size and resizes the on-disk attribute
without holding mapping->invalidate_lock. Page faults take the lock
shared, so a fault racing the resize can resolve a VCN against the
transient runlist state of ntfs_non_resident_attr_expand() and fail
with a spurious SIGBUS, and can interleave with the size-change
epilogue (truncate_pagecache(), i_size_write(),
pagecache_isize_extended()).
Take invalidate_lock exclusively around the whole resize after
inode_dio_wait(), matching the fallocate path and other filesystems
such as xfs, which wraps truncate in its mmaplock (= invalidate_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir
bpf_lsm_has_d_inode_locked() makes the verifier rewrite
bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume
that the caller already holds the inode's i_rwsem. The path_unlink and
path_rmdir hooks are listed, but security_path_unlink() and
security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the
victim inode's i_rwsem, so a sleepable BPF LSM program attached to
either hook mutates the victim's xattrs without the lock held.
Drop the two path hooks from d_inode_locked_hooks so that the verifier
keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take
the lock themselves. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix missing device lock in zpci_report_status()
When pdev is non-NULL, zpci_report_status() accesses the device's driver.
To get a consistent state matching the recovery, the device lock needs to
be held. Do so by expanding the existing device lock critical section.
The lock only needs to be held when the pdev is non-NULL, so extract
the pdev-specific reporting into a helper function which also adds a
lockdep assertion to detect calls without the device lock held. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: keep rtnl_lock for the ioctl self test
An offline self test that brings the interface down and back up with
netif_close() / netif_open() requires rtnl_lock for both. Since the
ethtool IOCTL path became rtnl-optional for ops-locked drivers, the
ETHTOOL_TEST ioctl runs holding only the netdev instance lock, so on an
ops-locked driver the self test now tears the device down without
rtnl_lock.
With lockdep this reproduces deterministically on every offline self
test on such a driver; note the sole lock held is the instance lock, not
rtnl:
WARNING: suspicious RCU usage
net/core/netpoll.c:207 suspicious rcu_dereference_protected() usage!
1 lock held by ethtool/107:
#0: (&dev->lock){+.+.}, at: dev_ethtool
Call Trace:
netpoll_poll_disable
__dev_close_many
netif_close_many
netif_close
fbnic_self_test
dev_ethtool_locked
dev_ethtool
dev_ioctl
sock_ioctl
__x64_sys_ioctl
Without lockdep the same condition trips ASSERT_RTNL() in
__dev_close_many() / __dev_open(); that check only samples the global
rtnl state, so it can be masked by a concurrent rtnl holder, but the
device is still being reconfigured without the lock it requires.
The ethtool self_test is a legacy ioctl-only command, so an ETHTOOL_TEST
case is only needed on the ioctl path. Add an opt-in bit for drivers whose
self test needs rtnl_lock and set it on the ops-locked drivers whose
offline self test tears the interface down and up:
- fbnic (ops-locked via queue_mgmt_ops): fbnic_self_test() offline path
uses netif_close() / netif_open().
- bnxt (ops-locked via queue_mgmt_ops): bnxt_self_test() offline path
goes through bnxt_close_nic() / bnxt_half_open_nic() /
bnxt_half_close_nic() / bnxt_open_nic(), which close and reopen the
device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n". |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm()
nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still
linked on local->connecting_sockets: it looks the socket up with
nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and
returns, without taking the socket lock and without unlinking the socket
from the connecting_sockets list.
llcp_sock_release() selects the list to unlink from by sk_state: a socket
in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the
sockets list. Because recv_dm left the socket physically on
connecting_sockets but in the LLCP_CLOSED state, release() takes the else
branch and calls nfc_llcp_sock_unlink(&local->sockets, sk). That runs
sk_del_node_init() while holding sockets.lock, i.e. it removes the socket
from the connecting_sockets hlist under the wrong lock. A concurrent
connect() linking another socket onto connecting_sockets under
connecting_sockets.lock then mutates the same hlist unserialized, which
corrupts the list and desyncs the sk_add_node()/sk_del_node_init()
sock_hold()/__sock_put() pairing. An unprivileged local process holding
LLCP sockets, with the DM supplied by the remote peer over an established
LLCP link, can drive this to leak kernel sockets without bound (the
mis-decrement goes through the non-freeing __sock_put() path, so the
object is never released), leading to memory exhaustion / DoS.
This is the same class of bug that was fixed in the sibling handler
nfc_llcp_recv_cc() by commit b493ea2765cc ("nfc: llcp: Fix use-after-free
race in nfc_llcp_recv_cc()"); recv_dm did not receive the equivalent fix.
Fix it the same way: take lock_sock(), re-check that the socket is still
hashed (release() may have won the race), and for the NOBOUND/REJ case
unlink it from connecting_sockets before moving it to LLCP_CLOSED. The
unlink drops the connecting_sockets membership reference via
sk_del_node_init(), leaving the socket unhashed, so the later
nfc_llcp_sock_unlink() in llcp_sock_release() becomes a no-op and no
double put occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: hold IPsec RX state under the XArray lock
nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the
xfrm_state it found. The delete path can erase the entry and drop the last
state reference in that interval. RX can then try to increment a zero
refcount after the state has been queued for destruction.
The driver queues firmware invalidation asynchronously; the delete path
does not wait for the command to complete or drain pending RX processing.
The XFRM garbage collector waits for an RCU grace period before freeing
the state. That delays reclamation but does not make acquiring a reference
from zero valid.
Take the xfrm_state reference before releasing the XArray lock so
xa_erase() cannot run between lookup and reference acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Exact UNIX diag lookups hold a reference to the socket, but not to
u->path. Meanwhile, unix_release_sock() clears u->path under
unix_state_lock() and drops the path reference after unlocking.
Read the inode and device numbers for UNIX_DIAG_VFS while holding
unix_state_lock(), then emit the netlink attribute after dropping the
lock.
This keeps the VFS data stable while the reply is being built. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure. |
